Atanu Halder

Assistant Professor

Mechanical & Aerospace Engineering

  • Assistant Professor
    Mechanical & Aerospace Engineering
  • Oklahoma State University, Mechanical and Aerospace Engineering, 340 Engineering South, Stillwater, Oklahoma, 74078, United States

TEACHING SUMMARY

Dr. Halder's teaching experience at OSU is listed below:

- MAE 3724, Dynamic Systems Analysis and Introduction to Control
- MAE 5103, Advanced Dynamics

TEACHING

  • COURSE TAUGHT
    Doctoral Dissertation
    8 Jun 2026 - 31 Jul 2026
    Independent research under the direct supervision of the student's doctoral dissertation adviser.Offered for variable credit, 1-15 credit hours, maximum of 42 credit hours.Prerequisite(s): Admission to MAE PhD program and consent of the student's dissertation adviser.
  • COURSE TAUGHT
    Advanced Study
    12 Jan 2026 - 1 May 2026
    Study and investigation under the supervision of a member of the faculty along lines of interest well advanced of and supported by the 5000-series courses.Offered for variable credit, 1-12 credit hours, maximum of 12 credit hours.Prerequisite(s): Approval of the student's advisory committee.
  • COURSE TAUGHT
    Computer Methods in Analysis and Design
    12 Jan 2026 - 1 May 2026
    Application of linear algebra, numerical methods, statistics, and computer methods in the design, analysis, and simulation of mechanical, thermal, and fluid systems.Prerequisite(s): Grades of 'C' or higher in ENGR 1412 and ENSC 2123 and MAE 3013 and (MAE 3724 or concurrency).
  • COURSE TAUGHT
    Doctoral Dissertation
    12 Jan 2026 - 1 May 2026
    Independent research under the direct supervision of the student's doctoral dissertation adviser.Offered for variable credit, 1-15 credit hours, maximum of 42 credit hours.Prerequisite(s): Admission to MAE PhD program and consent of the student's dissertation adviser.
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    12 Jan 2026 - 1 May 2026
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Doctoral Dissertation
    18 Aug 2025 - 5 Dec 2025
    Independent research under the direct supervision of the student's doctoral dissertation adviser.Offered for variable credit, 1-15 credit hours, maximum of 42 credit hours.Prerequisite(s): Admission to MAE PhD program and consent of the student's dissertation adviser.
  • COURSE TAUGHT
    Master's Thesis
    18 Aug 2025 - 5 Dec 2025
    A student studying for a master's degree who elects to write a thesis must enroll in this course.Offered for variable credit, 1-9 credit hours, maximum of 9 credit hours.Prerequisite(s): Graduate standing in MAE and consent of student's adviser.
  • COURSE TAUGHT
    Statistical Learning
    18 Aug 2025 - 5 Dec 2025
    This course will be used as a temporary number for new graduate course offerings or special one-time only graduate course offerings. Repeat credit may be earned with different course subtitles assigned. Offered for 3 credit hours and no set maximum of credit hours obtained.Prerequisite(s): Graduate standing or consent of instructor.
  • COURSE TAUGHT
    Doctoral Dissertation
    9 Jun 2025 - 1 Aug 2025
    Independent research under the direct supervision of the student's doctoral dissertation adviser.Offered for variable credit, 1-15 credit hours, maximum of 42 credit hours.Prerequisite(s): Admission to MAE PhD program and consent of the student's dissertation adviser.
  • COURSE TAUGHT
    Master's Thesis
    9 Jun 2025 - 1 Aug 2025
    A student studying for a master's degree who elects to write a thesis must enroll in this course.Offered for variable credit, 1-9 credit hours, maximum of 9 credit hours.Prerequisite(s): Graduate standing in MAE and consent of student's adviser.
  • COURSE TAUGHT
    Computer Methods in Analysis and Design
    13 Jan 2025 - 2 May 2025
    Application of linear algebra, numerical methods, statistics, and computer methods in the design, analysis, and simulation of mechanical, thermal, and fluid systems.Prerequisite(s): Grades of 'C' or higher in ENGR 1412 and ENSC 2123 and MAE 3013 and (MAE 3724 or concurrency).
  • COURSE TAUGHT
    Doctoral Dissertation
    13 Jan 2025 - 2 May 2025
    Independent research under the direct supervision of the student's doctoral dissertation adviser.Offered for variable credit, 1-15 credit hours, maximum of 42 credit hours.Prerequisite(s): Admission to MAE PhD program and consent of the student's dissertation adviser.
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    13 Jan 2025 - 2 May 2025
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    13 Jan 2025 - 2 May 2025
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    13 Jan 2025 - 2 May 2025
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    13 Jan 2025 - 2 May 2025
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    13 Jan 2025 - 2 May 2025
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).
  • COURSE TAUGHT
    Dynamic Systems Analysis and Introduction to Control
    13 Jan 2025 - 2 May 2025
    Physical and mathematical modeling of mechanical, electrical, fluid, thermal and mixed dynamic systems. Systems analysis in the time domain and in the frequency domain, with an emphasis on first and second order systems. Laplace transform method for solving ordinary linear differential equations. Representation of system models using transfer functions, block diagrams and state variable forms. Use of computer methods for solving linear and nonlinear dynamic system models. Introduction to dynamic system control. Laboratory investigation to demonstrate application. Same course as MAE 3723.Prerequisite(s): Grades of “C” or higher in ENSC 2123 and ENSC 2613 and MAE 3013 and (MAE 3113 or ENGR 2421).